 |
FEATURES:
Starex 2890-F series cutting nozzle is a screw type nozzle that is used with oxygen and acetylene. It fits into our Starex screw nozzle cutting torch and Harris model 28/H28 (Monarch) cutting torch. The Starex range comes in 7 sizes and depending on your nozzle size and gas equipment it can cut up to 200mm thick material with the current range sizes of Taurus 2890-F cutting nozzles.
| Tip | Cutting Thickness (mm) | Cutting Oxygen (psig) | Fuel (psig) | Orifice (mm) |
| 2890-1F | 0-10 | 1.0-1.5 | 0.2 | 0.8 |
| 2890-2F | 10-50 | 1.5-2.5 | 0.3 | 1.2 |
| 2890-3F | 50-100 | 3.0-4.5 | 0.5 | 1.6 |
| 2890-4F | 100-125 | 5.0-5.5 | 0.7 | 2.0 |
| 2890-5F | 125-150 | 5.5-6.0 | 0.7 | 2.4 |
| 2890-6F | 150-200 | 6.0-6.5 | 0.7 | 2.8 |
| 2890-7F | 200-300 | 7.0-9.0 | 1.0 | 3.2 |
FEATURES:
Starex 2890-F series cutting nozzle is a screw type nozzle that is used with oxygen and acetylene. It fits into our Starex screw nozzle cutting torch and Harris model 28/H28 (Monarch) cutting torch. The Starex range comes in 7 sizes and depending on your nozzle size and gas equipment it can cut up to 200mm thick material with the current range sizes of Taurus 2890-F cutting nozzles.
| Tip | Cutting Thickness (mm) | Cutting Oxygen (psig) | Fuel (psig) | Orifice (mm) |
| 2890-1F | 0-10 | 1.0-1.5 | 0.2 | 0.8 |
| 2890-2F | 10-50 | 1.5-2.5 | 0.3 | 1.2 |
| 2890-3F | 50-100 | 3.0-4.5 | 0.5 | 1.6 |
| 2890-4F | 100-125 | 5.0-5.5 | 0.7 | 2.0 |
| 2890-5F | 125-150 | 5.5-6.0 | 0.7 | 2.4 |
| 2890-6F | 150-200 | 6.0-6.5 | 0.7 | 2.8 |
| 2890-7F | 200-300 | 7.0-9.0 | 1.0 | 3.2 |
